FilterPod – Catch Pit Filter

FilterPod – Catch Pit Filter

  • Quick and easy to install
  • Cost effective
  • Reusable
  • Overflow port to prevent flooding in large storm events
  • Lifting eyes to allow easy removal and cleaning of the FilterPod

About FilterPod

The FilterPod is a prefabricated drop in catch pit filter, these are used to prevent water borne sediment entering the stormwater system.

The FilterPod catch pit filter is manufactured from a non-woven geotextile with high flow properties, this is dropped into the catch pit and the lid of the catch pit holds the FilterPod in place. There are 2 lifting eyes to allow the FilterPod to be removed once the project is complete or to clean the sediment trapped in the FilterPod and be reinstalled. The FilterPod also has an overflow at the top of the filter to prevent flooding in a large storm event when the capacity of the FilterPod is exceeded.

Available from

Frequently Asked Questions

How do you clean a FilterPod for reuse?

Turn inside out and use a hose to flush out with water.

How many times can you reuse a FilterPod?

2-3 times depending on the length of each use.

When do I need to buy the FilterPod with the foam Seal?

Some grates have a gap at the edges that needs blocking with the foam seals.




FilterPod Catchpit Filter


FilterPod Catchpit Filter with Foam Seal


Installation Guide